During the working process of coal briquetting plant, the debugging of water content in coal material is a technical problem. If the coal material is too dry, consequences like half balls or fragile balls are easy to be caused. On the contrary, if the coal material to be fed are too wet, phenomena like blocking run and poor discharging would occur in the end. Therefore, water content in coal material should be well controlled before the working process of coal briquetting plant.
The debugging place in coal briquette press for water content is generally located in agitator. If adhesive like lime or clay is used, the water content in coal material should be controlled at about 18%-20%. If adhesive like paper pulp or humic acid is used, the water content should be controlled at about 10%-12%. If adhesive like asphalt is used, the water content should vary from 2% to 4%. The debugging process for coal briquette press machine is not only a chance to adjust or test the technical process and machinery equipment, but also an opportunity to experience for personnel.
The coal briquettes are many in kinds. Different kind of coal briquettes has different demands. Morality oriented, people will be honest; quality rooted, product will be excellent. As a professional manufacturer of briquette machine, Fote always regards the quality as life and customer as God. f you need our products, please click the website and leave messages on it: http://www.woodpelletmillsell.com. We will contact with you as soon as possible. If you have any question about our products, leaving your advice on our website is also OK. We will take them sincerely. Thank you!
If you need the latest price list, please leave us a message here, thank you! We guarantee that your information will not be divulged to third parties and reply to you within 24 hours.
Tell us your needs, there will be more favorable prices!
