Precautions for the Use of Wood Pellet Press

Wood pellet mill, also named as wood pellet press, is widely used to process materials like wood shavings, sawdust, rice hulls, corn straw, saw dust, tree bark, peanut hull, crop straw and so on. This paper mainly discusses about the basic principles that operators of wood pellet making machine should conform to during the daily working period. It is forbidden to start the wood pellet mill with loads. In special cases, operators should ask the managers. Start-up and shut-down of wood pellet machine should strictly conform to the technical demands or orders.

Shut-down is allowed when all materials are discharged out. The wood pellet press should work within rated load. During the working process of wood pellet making machine, operators should notice the working condition of some key parts like transmission and bearing, etc. If screws for fixing become loosened, the oil temperature of bearing will be extremely high and abnormal vibration and sound will be produced. Facing with this situation, you should timely shut down the wood pellet mill machine. Start-up can begin as long as all the failures are successfully dealt with.

Lubricating oil in reducer casting or other parts should be often noticed or checked. If oil leakage occurs or the oil level is less than required, timely treatment is needed. In general, lubricating oil in newly-used wood pellet machine should be changed after one month. After that, changes of lubricating oil should be made for every half year. With regard to the addition of lubricating grease, remember, the existed lubricating grease should be completely removed out before the addition of new one. Want more information? Fote wood pellet mill price: http://www.woodpelletmillsell.com/product/wood-pellet-mill.html.