Overheated Bearing of Ring Die Wood Pellet Mill

As a professional manufacturer of ring die wood pellet machine, Fote has made the production for more than 30 years. Many users give us the feedback that bearing of ring die wood pellet mill is easy to be overheated during the manufacturing process. Then, the following content will discuss about the reasons and solutions to this feedback. Basic reason for causing the above phenomenon is the serious friction between bearing and other parts. During the working process of ring die wood pellet mill, bearing moves continuously and rubs other parts. Then, along with the increasing friction, bearings will become overheated in the end.

To solve this problem, at first, you need to lubricate the bearings of ring die wood pellet machine frequently. Only so, frictional force of bearing can be alleviated as much as possible. If you don’t lubricate the bearing of ring die wood pellet mill for a much longer period, frictional resistance of bearing will become larger due to the oil shortage. As a result, temperature rise of bearing will become excessively high. Therefore, you should pay much attention to the lubricating work of bearing.

Besides, you can make the ring die wood pellet mill work in plans. Operation in much longer time for one run is not advisable. Since temperature outside has certain influence to the temperature of bearing, you can shorten the operating time of ring die wood pellet machine if temperature outside is excessively high. In a word, if you are faced with the overheating, you should make the machine rest for a short period until the hot temperature becomes low. If you need our products, it is OK to leave message on website of http://www.woodpelletmillsell.com or directly email us at vip@sinoftm.com.