Points for Notice to Run the FTM Wood Pellet Mill

Wood pellet mill, with another name of wood pellet making machine, is becoming more and more popular around the world markets. Along with the increasing appeal for clean environment and sustainable development, wood pellet mill will become a destined way to turn agricultural and forestry wastes into biomass pellets of great value.

To help you better and rapidly understand the structure and functions of wood pellet mill, FTM China Machinery gives you some suggestions. For newly-purchased wood pellet mills, they should be installed on level and solid grounds and firmly fixed by foundation bolt.

Before the working process of wood pellet mill, you should check the parts like tanker and cooling fun in advance. If these parts are normal, you are allowed to launch the dynamo. As to the oil in host transmission, you should add it timely if the remain is little. After you launch the dynamo and adjust the loading auger, feeding process can begin as long as wood pellet mill runs normally.

Since the dynamo is equipped with three-phase sources, it can start to work with reduced-voltage. As to the feeding speed, it should be kept at even. As for the feeding amount, it is dependent on the working current of wood pellet mill. Before making a halt, you should stop the feeding process first and then use the oil mix to break through the holes of ring die for about 3 or 5 minutes.

To change the parts, you have to wait until the wood pellet mill is cooled. Meanwhile, you should notice the distance for cleaning, lubricating and installing parts. Discounts for you on website!