Points for Care to Change Die of Wood Pellet Mill

To improve the working efficiency of wood pellet press, you should avoid the simultaneous use between new press rollers and old ring die. If you equip the wood pellet mill with new press rollers and old ring die, service life of press roller will be significantly shortened. What’s worse, the worn-out ring die will be hard to be repaired. Therefore, the new ring die should work with new press rollers, but not the old ones.

To make the discharging work at even, you should make the distance between press roller and ring die proper. If distance is smaller than the proper, parts of wood pellet mill like ring die and press roller will be seriously worn-out. The wear of ring die will be the most serious during the running period of wood pellet mill without any load inside.

If distance between press roller and ring die is larger than the proper, raw materials will be easy to slip. As a result, working efficiency of wood pellet mill will be seriously influenced. More seriously, quality of biomass pellets will become more and more poor. Known as the NO.1 brand of wood pellet mill, FTM China Machinery has made the production for more than 30 years.

In general, distance between press roller and ring die should be better controlled at about 0.1-0.4mm. To extend the sales market, FTM China Machinery can offer you greater discounts in the first five months of 2016. Meanwhile, free books for you on website.