Maintenance Means Much for Coal Briquette Machines

Effective daily maintenance and overhauling work means much for the service life and the continuous operation of all coal briquette machines. As the coal briquette machine usually works with great strength in harsh environment, it is very important for users to do well in the daily maintenance and overhauling work of the equipment.

The regular checking of the briquette machine we need to do include the following parts:

1.Overhaul the main frame and do complete cleaning, check if there is serious wear for bearings, screws, triangle lining plate, feeder and other parts;

2.Brush all powder and dust covering surfaces of mineral powder briquette machine and be careful not to bring dust and powder into the movable parts of the machine while overhauling;

3.Remove the reducer cap and check the meshing and wearing condition of all wheel gears;

4.Dismantle the roll shaft cap and see if it’s worn out; 5, check the basic screws and make sure they are not too loose.

Besides the above checking work, we also should pay special attention to the lubricating oil replacement and oil cylinder maintenance:

1.For both the open gear box and the reducer, the gear oil should be added up to the level of 60mm in order to submerge the gears; bearings of the roll shaft should be opened every three month for grease replacement;

2.When checking the oil pressure, make sure that the coal briquette machine isn’t running. If the pressure changes because of changing temperature or oil leakage, it is necessary to add new oil. For any oil leakage happening to the oil pressure system during the operation, users should shut down the equipment and make adjustment.

For more information, please leave us a message on www.woodpelletmillsell.com or send us email at vip@sinoftm.com.