Feedback we receive from many customers that the service life of wood pellet making machine is different from the desired. As a professional wood pellet mill manufacturer, Fote also considers about this problem. Why it comes to this conclusion? During the working process of wood pellet mill machine, users do not pay much attention to the maintenance for mold and press rollers. So, the service life of wood pellet press would be seriously influenced.
Reasons for causing the shaping failure of coal briquette machine are many. According to the previous surveys, there are three reasons that users complain about for many times. They are poor pressure, unqualified roller skin and wrong design of ball socket. When the above three problems occur, the first thing you need to do is introspection.
Being the NO.1 brand of China mining machinery, Fote has the responsibility to answer the national calls. It is normal for coal briquette press machine to produce some noises during the working period. While, for operators, these minor noises would be long-term threats. How to deal this problem is what we will discuss about.
Coal briquette press machine, also named as coal briquette plant, is widely used for industries like refractory matter, power plant, metallurgy, chemical, energy, transportation and heat supply, etc. With regard to the poor demolding of coal briquette machine, many factors like wrong technical process and burrs in ball socket should be blamed for. What we can do is to remove the burrs with rough sand.
Coal briquette machine, with another name of coal briquette machine, is mainly used to suppress materials like coal, gypsum, limestone, charcoal, slag, iron, aluminum, blue carbon, powder, kaolin, clay, etc. The balling rate of coal briquette press machine is a problem that users should pay much attention to. If the balling rate is less than satisfactory, then, users will doubt the capacity and quality of coal briquetting machine.
During the working process of coal briquetting plant, the debugging of water content in coal material is a technical problem. If the coal material is too dry, consequences like half balls or fragile balls are easy to be caused. On the contrary, if the coal material to be fed are too wet, phenomena like blocking run and poor discharging would occur in the end. Therefore, water content in coal material should be well controlled before the working process of coal briquetting plant.
Problems like poor strength of coal briquettes either in cold or hot, weak heat stability and low reactive activity are commonly seen during the working process of coal briquette press machine. Do you know the reasons? Reasons for causing the poor cold strength of coal briquettes are concluded in the followings.
In the evening of August 8th, four Chinese young boys have drawn great attention from the world in one night. They are called Mo Youxue, Xie Zhenye, Su Bingtian and Zhang Peimeng. The average age among them is about 24. They earn the Sliver at the World Champion and make breakthroughs around the Asian world. Being the NO.1 brand of China mining machinery, Fote is indeed happy when hearing this news.
The feeding process of coal briquette machine is generally divided into several procedures. Firstly, we need to crush materials into powders with size about 1-3mm. If necessary, we need to add the adhesives and use the agitator to evenly agitate the mix of adhesive and coal material. Then, these agitated materials are delivered into the inner part of coal briquetting plant.
During the working period of high pressure briquetting machine, users are always troubled with many problems, especially the speed control. During the working process of high pressure briquette machine, what users can control are the feeding amount and revolving speed of press rollers.
