For the pelletizing work of straw pellet mill, performance of every part plays an important role, especially for the main driving system. To examine the working performance of main driving system, you should notice whether noise and vibration exist during the working process of straw pellet machine. For operators, you should master the performance, principle and structure of straw pellet mill and ways for adjust the parts.
During the working process, whether raw materials can successfully pass through the ring die is often dependent on the factors of effective length and roughness of die hole. The effective length of die hole can be often described by the depth-diameter ratio.
Straw pellet mill, also named as straw pellet mill, is mainly used to suppress agricultural and forestry materials like eucalyptus wood, birch, poplar, fruit tree, agricultural straw and bamboo powder. As an amazing machine to produce pellets, straw pellet machine can effectively deal the materials rich in coarse fiber. Being equipped with wear-resistant molds, straw pellet machine is featured in the long service life, high quality and great energy conservation.
Straw pellet mill, also named as straw pellet mill, is mainly used to suppress agricultural and forestry materials like eucalyptus wood, birch, poplar, fruit tree, agricultural straw and bamboo powder. As an amazing machine to produce pellets, straw pellet machine can effectively deal the materials rich in coarse fiber. Being equipped with wear-resistant molds, straw pellet machine is featured in the long service life, high quality and great energy conservation.
During the working process, whether raw materials can successfully pass through the ring die is dependent on factors like pressure and fractional force in die holes, fricational coefficient between raw materials and die wall, water content in raw materials, particle size of raw materials, temperature, tempering time for the deformed raw materials, time for suppressing raw materials, effective length of die hole, roughness of die hole and wearing resistance of raw materials.
Straw pellet machine, with another name of straw pellet making machine, is mainly used to produce the biomass pellets. With wide application ranges, biomass pellets can serve as the ideal alternates of natural resources like coal, oil and gas. As to the bearings used for transmission parts of straw pellet mill, they are featured in the high precision and exported from Japan. For the oil seal exported from America, it is wear-resistant and heat-resistant. For the lubricating system installed in straw pellet mill, it plays the roles of automatically realizing the recycled cooling and timing lubrication.
Straw pellet mill, also named as straw pellet machine, is mainly used to suppress agricultural and forestry materials like Straw, Rice Hulls, Corn Straw, Saw Dust, Wood Shavings, Tree Bark, Peanut Hull, Crop Straw, etc. For different breeds of raw materials, you should select the ring die with suitable depth-diameter ratio. Or else, the die holes would be seriously blocked. For any kinds of raw material, layer of raw material should have a limit. If the layer of raw material is higher than the limit, press rollers will slip and straw pellet mill will be blocked.
As its name implies, straw pellet mill is a machine used to suppress agricultural and forestry materials into pellets. Featured in the high thermal efficiency, easy storage and convenient transportation, pellets of straw pellet making machine can serve as the ideal alternates of biomass energies like coal, oil and natural gas. By virtue of the high-precision screw gears, transmission efficiency of straw pellet mill can be higher about 98%.
As its name implies, straw pellet mill is mainly used to suppress agricultural and forestry straws into pellets of great value. Finished products of straw pellet machine, as the ideal alternates of natural resources like coal, oil and gas, are of great economic and social benefits. If you want to make fodders of high protein like milk feed, calf feed and concentrated feed, you can add sufficient powders or moderate urea into raw materials before the working process of straw pellet making machine.
During the manufacturing process of pellets, you may confront failures like blocking of ring die, low working efficiency and false information labeled on rating plate, etc. These failures may bring a lot of troubles for fodder enterprises and seriously influence the normal production. The following content will discuss about the factor of material size for the working efficiency of straw pellet machine. Finer the size of crushed materials, greater the ability for materials to absorb the steam. What’s more, for those crushed materials, they are easy to be modulated and pelletized.
