Straw pellet mill, also named as straw pellet machine, has developed rapidly in these years and contributed a lot for the development of biomass energy. In the past, people often directly burn out the agricultural and forestry wastes like straws, branches and leaves, etc. While, by doing so, they have to confront the problems of environmental pollution and resource wastes. At present, along with the social development, FTM China Machinery produces the straw pellet mill.
With wide application ranges, the straw pellet making machine can be used for industries like livestock, breeding plant, feed mill, brewing, sugaring, paper making and cigarette, etc. By virtue of the unique technological process, the straw pellet mill can finish the processes of low-temperature drying, cooling and screening for one time. Taking the hydraulic device as the example, we can divide it into single cylinder and double cylinders. In the aspect of performance, the hydraulic device takes an important part for the straw pellet mill.
Straw pellet mill, also named as straw pellet machine, is able to produce pellets for making fodders, fertilizers and fuels. While, sometimes, it is not easy to make the pellets. Why? The following content will discuss about the reasons one by one. Before being fed into the straw pellet making machine, raw materials have to be crushed first. While, the size of crushed materials should be matching with the feeding mouth and mould cavity of crop stalk pellet machine.
For those easy-wearing parts like ring die, press roller and bearings, FTM China Machinery makes up of them with wear-resistant materials. Featured in the high working efficiency, great working capacity, easy maintenance and simple operation, FTM straw pellet making machine is able to produce pellets for making fodders, fertilizers and fuels. Being supported by the intellectual property rights, straw pellet mill can suppress all kinds of powdered materials into particle pellets with size varying from 1.5mm to 12mm.
Featured in the reasonable design, reliable quality and easy operation, the straw pellet making machine is very small in the volume and can help you to save a lot of energies. Electric heater unit for automatic control, being installed in the straw pellet machine, can randomly adjust the humidity of raw materials and ensure the working efficiency.
At present, biomass energy takes a relatively large proportion in the energy structure for commercial purposes. For those agricultural and forestry wastes, they will pollute the surrounded environment and cause the serious waste if being directly burned out. Therefore, reasonable and feasible application of biomass energy is of significant importance to improve the using environment of resource, ecological environment of human beings and high-level utilization of biomass energy.
Straw pellet mill, also named as straw pellet machine, is mainly used to produce pellets with size varying from 4mm to 30mm. With the ability to turn wastes into things of great value, the straw pellet making machine can be used to process materials like straw, rice hulls, corn straw, saw dust, wood shavings, tree bark, peanut hull and crop straw, etc. The performance of mould is an important factor for the output. As the heart of straw pellet machine, the mould should be maintained well.
By virtue of the reasonable design and installation for piping system, the work of straw pellet mill can effectively ensure the pressure and flow of steam, feasibly avoid the entry of condensate water in pipe into the modulator. The suitable steam pressure should vary from 0.2MPa to 0.4MPa. If you want to make the steam pressure in the stable condition, the fluctuations of pressure should be no more than 0.05MPa. When it refers to the purchase of reducing valve, you should select the one featured in the excellent quality and stable performance.
Featured in the high working efficiency, convenient operation and easy maintenance, the straw pellet mill is quite popular among customers at home and abroad. In general, for the first application of ring die in straw pellet making machine, you should grind it with the oil materials. Through the effective grinding, ring die can exert its greatest value during the working process of straw pellet making machine. During the grinding process, you should gradually put the sand aggregates.
As its name implies, straw pellet machine is a machine used to make the biomass particles. The biomass particles can be used as fodders or fuels. For most users of straw pellet mill, the output is always the first problem they care about. Before using the straw pellet making machine, you should use the mix of bran, fine sand and engine oil to carefully, patiently and reasonably grind the mould for about 30 minutes. Then, you can operate the straw pellet making machine.
