Featured in the high working efficiency, great working capacity, long service life and easy maintenance, wood pellet mill is mainly used to process agricultural and forestry materials. For water content inside raw materials, it should be controlled at about 15%-20%. While, to realize the normal working of wood pellet machine, you should dry the raw materials. Water content inside materials should not be too high. Or else, the output and molding rate of wood pellet machine would be influenced.
Sawdust pellet mill, also named as sawdust pellet machine, is mainly used to process agricultural and forestry materials. If you can not operate or maintain the sawdust pellet mill well, it will be easier to have some failures during the working process. The first is the blocking of tremie pipe. When the tremie pipe is blocked, raw materials stored in inner shell can spill into the finished products. As a result, fineness of finished products will suddenly become greater. For this situation, you should immediately shut down the sawdust pellet machine for checks.
Straw pellet mill, also named as straw pellet machine, is mainly used to make the biomass fuels. For the industry of straw pellet machine, it is quite wide in the prospect under the support of national policies. For the development of straw pellet making machine in the past two years, it is quite rapid. Due to the lack of unified standard, industry of crop stalk pellet machine is jumbled-up. For some suppliers of straw pellet machine, they make a lot of shoddy products and reduce the quality of materials to promote the sales.
Straw pellet mill, also named as straw pellet machine, is mainly used to process agricultural and forestry materials. If fineness of raw materials is too thick, you have to confront the problems like serious wear of ring die and press rollers, low working efficiency, great energy conservation and easy fracture of finished products. On the contrary, if fineness of raw materials is too thin, the finished products will be fragile. If raw materials can all pass through the screen, the pelletizing work will be favorable.
With products being exported to countries like America, India, Pakistan, Japan, Australia, FTM China Machinery is known as the NO.1 brand of China Mining Machinery. As the hot product of FTM China Machinery, straw pellet mill is more and more popular in these years. Featured in the even size, smooth outlook, high intensity and great mobility, the finished products of straw pellet making machine can be used to make fertilizers, fodders and fuels.
At present, the environmental crisis on earth is indirectly or directly contacted with the utilization of mineral fuels. After being burned out, these fuels can produce a lot of pollutants like carbon dioxide, sulfur dioxide and nitric oxide. These pollutants are regarded as the sources for environmental pollution, acid-rain and green-house production. For those agricultural powers, they are rich in the biomass energies. Therefore, it is quite hopeful to comprehensively use the biomass energies.
Straw pellet mill, also named as straw pellet machine, is mainly used to suppress materials of agricultural and forestry wastes like wood shavings, sawdust, rice hulls, corn straw, saw dust, tree bark, peanut hull, crop straw, etc. As a professional supplier of straw pellet making machine, FTM China Machinery has accumulated many experiences for production. The following content will discuss about them one by one.
Along with the international appeal for recycling the straws, wood pellet mill is becoming more and more popular around the global market. Along with the development for recent years, technologies for recycling the straws have become more and more impeccable. Wood pellet mill, also named as wood pellet machine, is able to suppress those agricultural and forestry wastes into things of great value like fodders, fertilizers and fuels. Featured in the low ignition point, long burning time and zero pollution, the finished products of wood pellet press can be used as excellent fuels.
With remarkable features of high degree of automation, great energy conservation, strong environmental protection, high output, low price and simple operation, wood pellet machine is a good choice for you. Before operating the wood pellet mill, you should carefully check the fineness of raw materials to avoid the entry of foreign materials like metal and stone, etc.
Wood pellet mill, also named as wood pellet machine, can automatically finish the feeding process and discharging process through the conveyor. Featured in the even size, smooth outlook, high intensity and great mobility, the finished products of wood pellet making machine can be used to make fertilizers, fodders and fuels. Featured in the low laboring strength, high working efficiency and great working capacity, wood pellet machine has greater demands toward the water content in raw materials and particle size of finished products.
